Can You Paint Drylok On Wood? [Ultimate Tips to make it work!]

By Teddy Woodward · Last updated 2026-09-09

Drylok is a paint that can be used on wood. It has been available in the United States for the past few years, but many people are still unsure about it. 

Drylok, a self-priming paint, is a durable and eco-friendly option for indoor painting. With Drylok’s patented technology, you can paint on wood without the use of primer or stripper. This article will show you how to apply Drylok on wood without sanding or priming.

Can you use Drylok paint on wood?

Drylok is a two-component polyurethane paint that is formulated to be used on wood. It has been designed specifically for use on wood with the intention of providing a high level of protection from weathering and moisture.

Looking for ready-made plans? You can look through TedsWoodworking's plans (affiliate link), a third-party plans library that, per its vendor, is searchable by project type and includes cut lists. It is not affiliated with Ted Wood Plans.

This paint does not require priming or sanding, it dries quickly, and is easy to apply.

What is Drylok and why should I use it?

Drylok is a paint that helps you keep your roof in great shape and prevents leaks from occurring.

It is an amazing sealant for people who have shingles, metal roofs, or even flat roofs because it is easy to apply. It also lasts for many years with proper care.

So if you want to prevent leaks and keep your roof in good condition, Drylok is the best option for you.

There are many benefits of Drylok like:

• It protects against rot, fungi, moulds, insects, and termites.
• It provides excellent coverage on porous surfaces without creating surface defects such as bubbling or blisters.
• It provides superior performance in damp conditions by forming an impermeable seal that prevents moisture penetration from the outside environment into the substrate.

Can you use masonry waterproof paint on wood?

Masonry waterproof paint is usually used on concrete and brick surfaces. However, it can also be used on wood to prevent damage from water and moisture.

For masonry waterproof paint to work effectively, you need to:

• Clean the surface with a cleaner or soap solution before applying the masonry waterproof paint.
• Use an applicator brush that is made for use with the type of masonry waterproof paint that you are using. Any type of protective gear such as gloves and goggles when painting near electrical wires or areas where dust might fall into your eyes while working with drywall materials such as plasterboard.
• Allow time for the wood to dry properly before walking on it so that the wood has enough time to fully adhere to the surface. Being painted in order to prevent any slipping or loss of adhesion due to water damage from rain or snowfall which may occur after the application has been completed if not allowed adequate drying time.

What’s the difference between Drylok pro and Drylok extreme?

Drylok pro is a 3-layer system that consists of two topcoats and one undercoat. It’s recommended for interior use, but can be used on the exterior as well.

Drylok extreme is a 2-layer system that consists of an undercoat and topcoat. It’s recommended for exterior use only.

Does exterior paint waterproof wood?

If you are wondering does exterior paint waterproofs wood, then the answer is Yes.

Exterior paint is designed to waterproof wood and will only seal the surface of the wood with a glossy finish.

Does dry wood preservation have anything to do with using Drylok on wood?

No, drywood preservation is a process of preserving the surface of the wood that has been exposed to water. It can be done by using oil or wax as well as other materials like paint.

Drylok is a form of silicone sealant that is used on concrete surfaces and has a high waterproofing capacity.

How do you apply Drylok to wood?

In order to apply Drylok to wood, you will need to use a polyurethane-based primer and then a polyurethane-based finish.

Drylok can be applied in the following ways:

1. Sanding with 220 grit sandpaper or finer first, followed by drywall joint compound.
2. With a wire brush.
3. Using a sanding block.
4. Using an orbital sander.
5. By hand (useful if you are repairing or replacing holes in your woodwork and need to use Drylok by itself without any other surface treatment).

Is there a difference between the special spray cans and the regular spray cans of Drylok?

There is a difference between the special spray cans and the regular spray cans of Drylok.

The special spray cans have an extra coating that prevents corrosion on metal surfaces and paint, which makes them more durable. They also provide better adhesion to surfaces such as steel, aluminum, fiberglass, concrete, and masonry.

The regular spray cans are not coated with this protective layer and are made for general-purpose use on wood or plastics.

Do I need to purchase any additional tools in order to use Drylok on wood?

No, you do not need to purchase any additional tools in order to use Drylok on wood. However, if you are looking for something more specific than what the sealant offers, then it is recommended that you purchase other sealants that can help with your particular project.

Related posts:

1. Top 6 Best Dial Indicator For Woodworking [Reddit Choices]
2. 5 Best Finish for Maple Wood [Reddit Choices]
3. What is the difference between common board and pine?
4. Top 5 Best Varnish for Exterior Wood Doors [Reddit Choices]

This page contains affiliate links. If you buy through them, Ted Wood Plans may earn a commission at no extra cost to you. Affiliate disclosure.